50cal Detailing Target Tar & Glue Remover 5L

The ultimate in tar and glue removal. We have formulated into this hydrocarbon base a nonpolar surfactant blend that rapidly accelerates the penetration time into tar and glue deposits. You will see the tar literally dissolve in the solution and turn it brown. This will not affect top coats, paints or polishes when used as directed. It is completely free from harsh industrial hydrocarbons and chlorinated solvents and due to the adapted surfactant chemistry results in a super quick removal time.

This product should ideally be applied to a microfiber cloth or sponge and held onto the affected area for 10-20 seconds. Then apply gentle rubbing pressure in a circular motion. After which, if there is any deposit left reapply, and this will complete the removal. Wipe the treated surface with a clean microfiber cloth and to complete the finish, try using Stealth Last Touch Detailer as an aid to complete surface finishing.

In short:
- Market leading speed of removal.
- Safe for nearly all surface finishes.
- Mild odour.
- Extremely efficient and easy to use.
- No harsh solvents

Usage
Ensure paintwork is dry and thoroughly cleaned. Spray Target onto the affected panel / area and allow to activate for 2 minutes. Wipe off with a clean microfiber cloth then rinse thoroughly with fresh water or diluted neutral shampoo. Never apply and allow to dwell on surfaces in direct sunlight. Always check the suitability of the product for your vehicle first, by doing a quick test.