Tar X - Tar & Bug Remover (500ml)

Tar X is a super strength tar, adhesive, and bug remover as well as a degreaser that derives its power from 100% of the solvents extracted from orange peels. This makes it eco-friendly but don't let that fool you when it comes to the power of this underated product. Take a look at the product videos to see it in action.

Features:

• This product contains no chlorinated solvents or harsh chemicals and is not corrosive. It has over 60% active ingredients.
• Cuts through heavy grease and tar
• Use for all purpose de-greasing tar and asphalt removal, insect , tire mark ,adhesives spot removal, traffic film and many other tough cleaning jobs.
• Leaves surfaces clean in one step.
• Slightly more viscosity than other tar removers so it will cling longer to the surface, cutting down on the volume of product used, & creating less run off.
• Quickly penetrates and loosens tar, so it may be flushed off with water.
• Can also be used as a heavy duty parts and equipment cleaner.
• Built in color tracers, which aid in viewing where it has been applied and when it has been removed.
• Great Citrus Smell
• Fast Reaction Time
• Easy to use
• Heavy duty formula allows exteneded dwell times when needed
• Based on renewable solvents and natural ingredients
• Reduces the need for intensive claying when organic contaminants are the culprit

Corey's Tips and Method of Application:

• Tar X is a (citrus based) solvent so it’s recommended that you apply it to a dry surface where it won’t be diluted by water.
• After shaking the bottle and spraying onto a dry surface I allow it to dwell for anywhere from 3 to 10 minutes depending on how thick the tar is and the situation of the environment.
• Agitate the area with a damp wash mitt or sponge before rinsing it off.
• Tar X should not be allowed to dry on surfaces or be applied in direct sunlight.
• Do not leave on the surface for more than 7 to 10 minutes or allow to dry.
• If using Tar X as a spot treatment and run into stubborn tar you can take a sponge and apply some Tar X to it before using it to agitate the tar.

Precautions and Warnings:

• Avoid sensitive clear plastics like headlights and clear bras. Headlights can re lightly re-polished but clear bras should be avoided completely,
• WARNING : Do NOT let dry on plastic or other sensitive materials of possible damage may occur.
• Avoid working under direct sunshine or hot surface.
• Avoid spraying on acrylic paint surfaces, or poor after market acrylic paint, it may affect that surface and cause a possible bleaching affect.
• Work in a well ventilated area.
• We strongly recommend the used of eye protection, safety gloves and a dedicated face mask while working with any professional car care product which produces vapor or misting due to possible blow backs.