Feynlab Pure Rinseless Wash V3 1L

PRODUCT HIGHLIGHTS

1. Superior Cleaning Power: Our new formulation features advanced polymeric cleaning technology that tackles dirt, grease, and grime with ease, leaving your car sparkling clean and ready to turn heads.

2. Eco-Friendly: Join the movement towards sustainable living with Rinseless V3. By minimizing water usage, you’re not only saving time but also doing your part to protect the environment. Rinseless V3 requires less than a bucket of water to clean your car. And if you’re cleaning multiple vehicles through the recommended 2-bucket method, this helps to further minimize water usage.

3. Glide Effect and Friction Reduction: Experience smooth, friction-free cleaning that protects your car’s paint while delivering professional-grade results. The slickness and glide effect of Rinseless V3 ensure that no dirt or grime sticks to your car’s surface.

4. Versatile Application: From paint to wheels to plastic trim, Rinseless V3 is your go-to solution for all your car cleaning needs. With its multi-purpose functionality, it’s like having an entire detailing kit in one bottle.

BENEFITS

• Simplify car cleaning with its versatile application, offering both Waterless and Rinseless dilutions.
• Formulated with our advanced polymeric cleaning technology, ensuring deep cleaning by dissolving, and removing contamination effectively.
• Gentle yet effective on all exterior vehicle surfaces, including paint, plastic, rubber, carbon fiber, and more.
• Rinses thoroughly, leaving behind no residue and revealing a pristine surface condition. .
• Rinseless V3 is the perfect solution for prepping or maintaining ceramic-coated vehicles, providing optimal cleaning without compromising coating integrity.

PREPARATION

Ensure the vehicle is in a shaded area free of contaminants. If the vehicle is heavily soiled, consider a pre-rinse to remove loose debris and avoid scratching.

WATERLESS WASH METHOD

• For a waterless wash, mix Rinseless V3 at a 1:125 dilution ratio. This means adding approximately 2 oz (or 60 ml) of Rinseless V3 to 1 gallon (or 7.5 liters) of water.
• Liberally spray the diluted solution onto the vehicle's surface to encapsulate and lift dirt.
• Using a high-quality, plush microfiber towel, gently wipe the surface to remove contaminants.
• Follow up immediately with a dry, clean microfiber towel to remove any residual moisture.

RINSELESS WASH METHOD

• In a bucket equipped with a Dirt Lock® Car Wash Bucket Insert, mix Rinseless V3 concentrate with water at a 1:250 ratio, adjusting the amount based on the total volume of water used.
• For heavily soiled surfaces, consider an additional pre-soak step to loosen dirt.
• Clean the vehicle's surface with a wash mitt or microfiber towel, employing the 8-sided folding technique to efficiently use clean sections of the towel.
• Wash from the top down and dry immediately with a high-quality microfiber drying towel.

RINSELESS WASH METHOD

• Create a quick spot cleaner solution at a 1:16 dilution ratio, translating to 8 oz (or 240 ml) of Rinseless V3 per 1 gallon (or 3.84 liters) of water.
• Spray directly onto spots or lightly soiled areas and wipe clean with a microfiber towel for rapid cleaning without the need for a full wash.

CLAY LUBE

• When used as a lubricant for clay barring, a stronger concentration is advisable.
• Mix at a 1:64 ratio, translating to 2 oz (or 60 ml) per 1 gallon (or 3.84 liters) of water. This higher concentration ensures sufficient lubrication to safely glide clay bars or mitts over the vehicle's surface, encapsulating and removing embedded contaminants without causing marring.

SAFETY AND STORAGE

• Always use Rinseless V3 in a well-ventilated area and wear protective gloves and eyewear to avoid irritation.
• Store the product in a cool, dry place away from direct sunlight.
• Dispose of any waste materials according to local regulations to minimize environmental impact.