CarPro Spotless 2.0 - Water Spot & Mineral Remover (500ml)
Spotless 2.0 uses an upgraded chemical formula with stronger acids to break down the mineral deposits on the surface before they can etch into the finish, thus negating the need for time consuming polishing, prolonging the life of the paint film.
Spotless 2.0 safely neutralizes hard water spots and stains on plastics, emblems, glass, paint and modern wheels with clear coat.
Spotless 2.0 is essential for preparing matte paint for coating and/or maintenance.
Spotless’s proprietary blend of carefully balanced acids safely breaks down mineral deposits on most hard materials, and can even be used on CQUARTZ coatings, helping you keep your vehicle spot-free.
FOR BODY PAINT:
Wash the vehicle with Reset, rinse and dry the paint. Work indoors or in the shade on cools panels. Prepare 2 damp Terry Weave Towels. Spray Spotless 2.0 directly onto the panel or into 1 damp Terry Weave Towel and spread on the affected area. Allow 30 seconds to 1 minute for Spotless 2.0 to breakdown the minerals on the surface before wiping the affected area to help loosen the mineral deposits. Do not let the chemical dry on the surface, wipe off with a 2nd damp Terry Weave Towel or apply Spotless 2.0 again. Repeat if necessary. After cleaning each panel, thoroughly rinse the panel with running water and dry before moving to the next panel.
FOR EMBLEMS AND WHEELS:
Clean the area with Reset, rinse and dry the surface. Always test in an inconspicuous area first. Spray Spotless 2.0 onto an applicator, microfiber or brush of your choice and apply to affected area 1 section at a time. Allow Spotless 2.0 to dwell on the affect area for 30 seconds to 1 minute without letting it dry before agitating to help break up the mineral deposits or stains. Repeat if necessary. Rinse thoroughly with running water after cleaning each area and dry.
Clean the plastics with Reset, rinse and dry. Spray Spotless 2.0 directly on the the textured plastic or apply to a damp microfiber towel and wipe it onto the surface generously to allow it to get into the pores. Allow Spotless 2.0 30 seconds to 1 minute to break down the mineral deposits and contamination before using a detailing brush to agitate and work the contamination out of the pores. Repeat if necessary. Rinse thoroughly with running water after clean each section and dry.
Apply Spotless 2.0 onto a Terry Weave Towel and spread on glass allowing to dwell for 30 seconds to 1 minute. Use the same Terry Weave Towel to polish the glass to agitate the minerals or for stubborn water spots apply some Spotless 2.0 to a polishing pad and polish the glass by machine or by hand. After spot removal thoroughly rinse the glass and adjacent panels with running water or wash with car shampoo and dry.
- Do NOT use in sun.
- Do NOT use on hot surface.
- Do NOT spray directly on glass. Use with caution, buff in and off instantly and neutralize.
- Wear disposable gloves while working to avoid possible skin irritation.
- Test in an inconspicuous area of any new material before using elsewhere.
- Do not ingest.
- Do not inhale.
- Keep out of reach of children.
- Do not spray in eyes, wear eye protection to be safe.
- May affect windscreen/window coatings and traditional sealants and waxes.
TIPS AND TRICKS:
- Identify water spots by water clinging to painted surfaces such as very slow sheeting or droplets catching on the panel, wipe the surface lightly with a damp microfiber towel and look for the outline of spots(also works for glass) using indirect light.
- Always work with cool panels out of the sun and wind.
Keep the working area small, and complete cleaning section by section
- Allow the product to dwell on the affected area without drying for maximum efficiency of breaking down the contamination
- Be careful of spray mist that may drift on to adjacent panels or glass.
At Blok 51 we take great pride in the speed of our dispatch and delivery times. We try our best to dispatch your orders the same day you order where possible. To ensure the best chance of your item being dispatched the same day we advise getting your order to us before 12pm (noon). We also offer a selection of shipping options to ensure you get the service you need.
You can even collect your order from the Blok 51 shop if you like. Just select ‘Collect In Store’ at the shipping options and we’ll contact you as soon as your order is ready.
All deliveries are tracked meaning you won’t have to worry about your parcel going missing.
The vast majority of our deliveries to the UK and Ireland only take 1-2 days so you don’t have to wait too long to get your hands on all your favourite detailing and valeting products.