Blok 51 Tornado Air Powered Cleaning Gun
The Blok 51 Tornado air power cleaning gun provides professional valeters and detailers the perfect tool for cleaning fabric upholstery, carpets, engine bays, plastics and pretty much any other surface.
This high quality cleaning gun uses air power to spin the metal nozzle to produce a spinning frenzy of cleaning power which simply blasts dirt loose from any fibres, loosens dirt from metal and plastic parts, and generally makes cleaning the stubborn stains and hard to reach areas a lot lot easier.
Unlike most existing tornado/tornador/vortex cleaning guns, this new model houses a stainless steel nozzle on the end which runs on a low friction, high speed bearing. This completely eliminates the chances of you being left stranded with a broken or rubber tube which the tradition guns use.
The Tornado Cleaning Gun is supplied with a 1/4" high flow airline fitting which fits quick release connectors. We recommend using a compressor with 100L capacity or more to get the most from your Tornado.
Low friction, high speed bearing
Air flow regulator to control air speed
1L cleaning chemical reservoir
Fluid flow regulator valve
How To Use The Tornado Cleaning Gun
Fill the reservoir with your desired cleaning chemical or clean fresh water
Connect the airline to the bottom of the handle
Adjust the regulator knob on the handle to control the airflow when the trigger is pressed
Adjust the green flow control valve to control the amount of fluid dispensed via the tornado nozzle
Direct the Tornado gun to the area to be cleaned and press the trigger on the handle
Try not to press the end of the nozzle onto the object you are cleaning and keep the nozzle no closer than 20mm from the surface.
After use dry off an wipe the Tornado Gun to ensure the unit is clean and dry for storage.