Auto Finesse Iron Out Contaminant Remover 500ml

Auto Finesse Iron Out intensive iron-contaminate and fallout remover safely and effectively removes the tiny pieces of ferrous shrapnel that can embed itself into practically any surface. Auto Finesse Iron Out targets and dissolves these iron particles before significant damage to your vehicle can occur.

Auto Finesse Iron Out is an advanced, pH neutral, reactive gel formula that specifically targets only iron-based contamination. It is suitable to use on all exterior surfaces, including paintwork, aluminium, magnesium, stainless steel, anodized finishes, chrome, glass, plastic, and even rubber. Iron Out also contains strong degreasing agents to help loosen road films, making it a powerful force in the decontamination process.

Application:
Auto Finesse Iron Out should be used as part of a multi-stage decontamination process, in between tar removal and claying. This process should be performed at least twice a year (before winter and after) on daily-driven vehicles before applying a car wax or paint sealant, or before any polishing work is performed. If you are unsure of whether or not your car has ferrous contamination, spray Iron Out directly onto a yellow Foam Pad, and wipe the product on a small section of your vehicle’s paint or wheels. We can almost guarantee that you will immediately witness a chemical reaction, alerting you that you have iron fallout that needs to be removed. This reaction is often referred to as ’Bleeding’, as the solution turns blood red where it contacts iron fallout, temporarily highlighting the contamination while it is dissolved.

DIRECTIONS FOR USE:
1: Apply liberally to the surface.
2: Wait for the reaction to turn any contamination purple.
3: Rinse thoroughly with water.
4: Repeat if necessary.

Do not use Iron Out in direct sunlight, or in temperatures below 32-degrees Fahrenheit/0-degrees Celsius.

Do not allow Iron Out to dry onto the surface, as staining may occur. Rinse off, or apply more Iron Out if necessary, to maintain a wet film.

Iron Out should always be used in a well-ventilated environment.