Angelwax Enigma Legacy Ceramic Wheel & Caliper Coating - 30ml
Angelwax ENIGMA LEGACY WHEEL & CALIPER is an easy-to-use titanium ceramic coating designed specifically for alloy wheels and brake calipers.
Angelwax ENIGMA LEGACY WHEEL & CALIPER is an easy-to-use titanium ceramic coating designed specifically for alloy wheels and brake calipers. Formulated with ease of use in mind, ENIGMA LEGACY WHEEL & CALIPER can be applied by both the professional detailer and detailing enthusiast alike and is a fabulous wheel and caliper coating that can be applied in minutes.
Unlike regular ceramic coatings, ENIGMA LEGACY WHEEL & CALIPER does not need to cure using infra-red lighting. Once applied, ENIGMA LEAGCY WHEEL & CALIPER will protect the surface from harmful fallout and contamination thus making cleaning and maintenance much easier.
Directions: Clean each wheel and caliper using BILBERRY WHEEL CLEANER or REVELATION thoroughly and suitably prepare the surface removing ALL contamination. For best results, before application, polish the wheels and calipers to a high gloss finish using either REDEMPTION or PERFECT POLISH. Always apply ceramic products in a sheltered environment.
Remove the cap on the bottle and apply a few drops of ENIGMA LEGACY WHEEL & CALIPER onto a microfibre applicator or a suede applicator cloth which is used in conjunction with the Angelwax foam block. Apply the coating to one wheel/caliper at a time. Once the wheel/caliper has been coated, allow the coating to cure to the wheel/caliper surface for 2 minutes before removing the residue with a clean, dry, microfibre cloth. Once this has been completed, use a buffing towel to create a high gloss finish.
The curing time of two minutes is dependent on a temperature of approximately 20°c/68°f.
The coating may take longer to cure if applied in colder temperatures and the coating will cure more quickly in a warmer environment.
This item is 1 x 30ml Bottle of Coating.
Top Tip: If possible, do not use the vehicle for approximately 2 to 4 hours after the coating has been applied as this will help the crosslink density of the coating to increase. This will maximise the surface properties and increase the durability of the coating.
Designed, Formulated and Manufactured in the UK by Angelwax Ltd
H304: May be fatal if swallowed and enters airways.
H314: Causes severe skin burns and eye damage.
P102: Keep out of reach of children.
P260: Do not breathe dust/fume/gas/mist/vapours/spray.
P301+P310: IF SWALLOWED: Immediately call a POISON CENTER or doctor.
P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes.
Remove contact lenses, if present and easy to do. Continue rinsing.
P331: Do NOT induce vomiting.
P501: Dispose of contents/container to hazardous or special waste collection
point, in accordance with local, regional, national and/or international regulation.
Brand | Angelwax |
---|---|
Size | 30ml |
At Blok 51 we take great pride in the speed of our dispatch and delivery times. We try our best to dispatch your orders the same day you order where possible. To ensure the best chance of your item being dispatched the same day we advise getting your order to us before 12pm (noon). We also offer a selection of shipping options to ensure you get the service you need.
You can even collect your order from the Blok 51 shop if you like. Just select ‘Collect In Store’ at the shipping options and we’ll contact you as soon as your order is ready.
All deliveries are tracked meaning you won’t have to worry about your parcel going missing.
The vast majority of our deliveries to the UK and Ireland only take 1-2 days so you don’t have to wait too long to get your hands on all your favourite detailing and valeting products.
-
Gtechniq Gtechniq AP1 Lint-free Applicator Pads x 10£0.50
-
Gtechniq Gtechniq AP2 Ultra Soft Foam Filled Microfibre Applicator£2.00
-
CarPro CarPro Suede MicroFiber (10cmx10cm) 10 PACK£6.99
-
blok 51 Blok 51 Blue Microfibre Applicator Pad 5" x 3"£2.00