Soft99 Water Block Dark 300g - Crazy Beading And High Gloss Wax
If you need a wax that is easy to use and has crazy beading, then SOFT99 Water Block Wax is the product for you. It is the most hydrophobic product in the SOFT99 range, and produces tall round beads which resemble glass marbles. In addition to the amazing water beading, it also produces an amazing wet-look shine and typically lasts for up to 3 months per application.
SOFT99 Water Block Wax is formulated specifically to deliver maximum water repellency. It achieves this using a waterproof resin suspended in a synthetic petroleum-based paste, which cures to form a durable layer of protection that is extremely hydrophobic. The beading not only looks good, but also helps to remove fresh dust and surface contaminants which land on the protected surface, which in turn makes routine washing easier and safer. This version of Water Block is the Dark edition and is generally said to perform better on dark colours but it can be used on any colour.
How to use Water Block
SOFT99 Water Block Wax should only be applied by hand. For best results, it should be applied to fresh, clean surface and one to two panels at a time and as thinly and evenly as possible using either the supplied foam applicator pad or a finer foam applicator. Try to avoid getting it on plastic trims, but if you do be sure to wipe it off straight away, otherwise staining may occur. The resulting application should then be left to cure for approximately 10 minutes before being buffed off carefully using a good quanity soft microfibre buffing Towel.