Infinity Wax Synergy Ceramic Wax 50ml
Probably the best synthetic wax we have ever used to date! This very durable high active ceramic wax contains more than meets the eye! Combining the powerful ceramic resins and binders found in the Synergy coating Infinity Wax have blended in an extremely high melting point technical mixture of modified polyethylene, Flourine derived polymer which is loosely related to PTFE and 2 solid Si02 polymers to create this masterpiece.
Famed in testing for its mind-blowing water behavior, Synergy wax is also at the time of publishing this, capable of 50 weeks durability and counting, the recent tests showed water contact angles of 106° at this point and a maximum of 124° 12 hours after initial application. Expect 14 months durability from this product.
This wax has a high resistance to detergents and is completely unaffected by temperatures, making it an ideal winter protection wax. A 50ml pot will cover 5-7 vehicles and a 200ml 25 on average.
1. Prepare the surface before waxing by removing previous waxes and sealants. The best way to do this is by light machine polish, an example would be Scholl Concepts S40 with a soft pad. Followed by a thorough wipe down using an alcohol-based panel wipe like isopropanol.
2. Take 1-2 swipes from the pot, only use soft foam to apply this wax. Once you have loaded the applicator proceed to press it over a small area of the panel several times, this creates an even application by collecting more wax as you work across the panel. Always ensure an even thin layer is applied, over-application will have negative effects on removal and performance.
3. Remove the wax with a short pile towel like our blue removal coth after 1-5 minutes maximum, this means only 1 panel at a time. It is normal to see a hazy residue after initial removal. Removing this residue is done by using our plush yellow buffing towel, wipe in straight lines to ensure the light residue has been removed.
5. After application, allow 3 hours for this wax to bond before wetting the vehicle and do not wash for 7 days after application.
Always wear gloves when using this wax, in some confined spaces you may wish to use a mask for application. If drowsiness or headaches start to occur stop using and move to an area of fresh air.
If any skin irritation develops stop using, remove clothing which may be contaminated and wash the skin with cold soapy water only, begin to introduce gentle scrubbing unless the skin is broken. If in any doubt seek medical advice and show the product MSDS sheet.
Always store this wax in a cool area where temperature fluctuations are minimal.