Gtechniq - G1 ClearVision Smart Glass - 15ml
Gtechniq G1 ClearVision Smart Glass gives you 1 to 2 years durability, Improves wet weather visibility helping to improve safety and eye strain and makes ice, bugs, tree sap etc. much easier to remove.
Unlike regular rain repellent coatings that adhere to the surface of the glass using relatively weak physical bonds, G1 uses a chemical bond which gives G1 unrivalled durability.
G1’s excellent durability and exceptionally low smear characteristics make it ideal for car windscreens.
Please note that with glass coatings there is a trade off between durability and functionality. Whilst G1 is recommended for car windscreens, for surfaces such as shower screens, or marine glass where maximum repellency is required, it is better to use G5 Water Repellent Coating for Glass and Perspex.
Apply at a temperature above 5 degrees celsius and not in direct sunlight
If you are applying indoors ensure that there is adequate ventilation
Ensure that the surface to be coated is entirely free from fats/oils - cleaning and then polish the glass Gtechniq G4 Nanotech Glass Polish
For application of G1 ClearVision Smart Glass use the application pad to wipe the coating onto the surface of the glass ensuring complete and thorough coverage. We recommend three coats on windscreens and a single coat on side, and rear screens - apply 2 coats, 1 immediately after the other on the windscreen, coat the side and rear screens once, and then return to the windscreen to apply the third and final coating
If ambient conditions are below 15 celcius allow the coating to cure for 30 minutes if above allow to cure for 15 minutes only
Once dried, use another lint free cloth to apply the G2 Residue Remover and then buff using a cotton towel type cloth - cotton is preferable to microfiber as the densely packed fibers of the microfiber cloth may remove too much of the partially cured coating from the surface - until you have removed all residue
We recommend buffing areas no bigger than quarter of a windscreen or half a side window at a time
On application of G1 wiper blades should be thoroughly cleaned with IPA or window cleaner, alternatively replace the wipers if they are towards the end of their lifecycle as if the blades are soiled they can judder on the surface. We also recommend applying G1 to the blades without removing residue
The coating requires no special maintenance or screen wash and it should last for approximately 30,000 miles of regular driving
There may be some wiper blade judder on the first application of the product, in 90% of cases this will disappear in one or two weeks
G1 and G2 have a shelf life of 2 years from purchase, for best result, use within 3 months of opening.
At Blok 51 we take great pride in the speed of our dispatch and delivery times. We try our best to dispatch your orders the same day you order where possible. To ensure the best chance of your item being dispatched the same day we advise getting your order to us before 12pm (noon). We also offer a selection of shipping options to ensure you get the service you need.
You can even collect your order from the Blok 51 shop if you like. Just select ‘Collect In Store’ at the shipping options and we’ll contact you as soon as your order is ready.
All deliveries are tracked meaning you won’t have to worry about your parcel going missing.
The vast majority of our deliveries to the UK and Ireland only take 1-2 days so you don’t have to wait too long to get your hands on all your favourite detailing and valeting products.
- AutoGlanz AutoGlanz - Valet + Glass Cleaner 5L£20.95
- Auto Finesse Auto Finesse - Vision Glass Polish 500ml£11.95
- Kleen Freaks Kleen Freaks - Glass Cleaner And Rain Repellant 500ml£10.99Out of stock
- AutoGlanz AutoGlanz - Vision Rain Repellant Glass Cleaner - 500ml£10.95