Blok 51 Snow Foam Lance Karcher K Series With Autoglanz Piste Snow Foam 1L
The snow foam lance in this bundle is suitable for pressure washers utilising the Karcher K Series fitting. Please check your pressure washer fitting before ordering.
Fits the following pressure washers:
K2 full control
K4 Full Control
K5 Full Control
K7 Full Control
The pre wash, possibly the most important stage in any detailing procedure! A good pre wash normally always consists of a snowfoam, generally a pH neutral or mild alkaline based foaming detergent that is applied to the entire vehicles exterior via a foaming applicator, with the intention of breaking down and somewhat remove the majority of soiling before any contact is made with the delicate surface of your vehicle. This initial step greatly reduces the possibility of causing ‘marring’ to the paintwork during your normal shampoo wash. Here at Autoglanz we strongly believe that a solid pre wash routine is the key to maintaining that desired showroom finish and this is the reason we created Piste High Foam pH Neutral Snowfoam.
Piste is an advanced, high foaming, pH neutral snowfoam specifically formulated to offer the maximum amount of cleaning power whilst still boasting a neutral pH level. Containing dedicated cleaning agents, specially developed to work at a neutral pH, plus advanced thickening agents to boast a generous cling time, Piste gets to work instantly upon contact and safely breaking down road grime, dissolving grease and oil whilst still keeping the soiling suspended from the surface. Encapsulated in its thick foam the soiling is transferring off the surface towards the floor. This special combination of surfactants drastically minimises the chances of any soiling being redeposited onto the surface whilst it is being transferred safely away from the vehicle.
Combined with its excellent cleaning power, Piste can also be diluted to a level of 200:1 and is 100% LSP/wax safe even at dilutions as low as 50:1 or lower, meaning it will not damage your wax or sealant layers that have already been applied to the surface.
Add to this the mouth water Apple fragrance and you will soon be safely carrying out a pre wash that you enjoy.
Directions for use:
1 Apply 1-2 inches to a 1l lance bottle and fill the remainder with warm water.
2 Apply a liberal amount via a pressure foam system and leave to dwell for a few moments.
3 Rinse thoroughly with a high pressure wash then continue with your regular wash method.
4 Do not allow to dry on the surface.